Skip to content
  • 🚚 FREE SHIPPING $40+ • ALL NATURAL • MSG FREE • GLUTEN FREE • ONE SHAKER. COMPLETE FLAVOR

Sign In

Prime Rib Temperature Guide + Reverse Sear Prime Rib

Prime Rib Temperature Guide + Reverse Sear Prime Rib

Prime rib is the centerpiece roast of the holidays, and it is also an expensive cut to get wrong. The good news: if you control the temperature, prime rib is surprisingly simple. This guide covers prime rib internal temperature for every level of doneness, how long to cook it and the reverse sear method for edge-to-edge pink slices with a dark crust.

Quick answer: For medium-rare prime rib, pull the roast at 120–125°F and let it rest. Carryover cooking will finish it at about 130–135°F. Cook it low, around 225–250°F, then sear it hot at the end. The USDA safe minimum for beef roasts is 145°F with a 3-minute rest.

Prime Rib Temperature Chart

Doneness Pull From Heat Final Temp After Rest
Rare About 115–120°F About 120–125°F
Medium-rare About 120–125°F About 130–135°F
Medium About 130–135°F About 140–145°F
USDA safe minimum About 135–140°F 145°F + 3-minute rest
Medium-well About 140–145°F About 150–155°F

A big roast holds a lot of heat, so carryover cooking can raise the temperature 5–10°F after you pull it. That is why the pull temperature is well below the final temperature.

How Much Prime Rib Per Person?

  • Bone-in: Plan on about 1 pound per person, or one rib bone for every two people.
  • Boneless: Plan on about ½ to ¾ pound per person.
  • Serving lots of sides? You can go a little lighter.

How to Season Prime Rib

Prime rib has so much beefy flavor that it does not need much: salt, pepper and garlic are the classic. Perry Spices Daily Drip is our all-natural blend of salt, pepper, garlic, onion and herbs, so one shaker covers a classic prime rib crust. It is MSG free with no fake fillers.

  1. Pat the roast dry and trim any excess fat cap to about ¼ inch.
  2. Season generously on all sides with Daily Drip.
  3. For the best crust, season the day before and refrigerate the roast uncovered overnight (a dry brine).
  4. Let the roast sit out for about an hour before cooking so it cooks more evenly.

Want it smokier? Finish the sliced roast with a small pinch of Hickory Salt.

Reverse Sear Prime Rib (Oven or Smoker)

  1. Cook low: Heat your oven or smoker to 225–250°F. Insert a leave-in probe into the center of the thickest part, not touching bone.
  2. Cook to about 10°F below your pull temperature. For medium-rare, that is about 110–115°F.
  3. Rest: Take it out and rest it, loosely tented, for 20–30 minutes while you heat the oven to 500°F (or get the grill very hot).
  4. Sear: Return the roast to the 500°F oven or hot grill for about 6–10 minutes, until a dark crust forms, and pull it at your target pull temperature from the chart.
  5. Slice and serve right away. Because it already rested before the sear, it is ready to carve.

How Long to Cook Prime Rib

At 225–250°F, a prime rib usually takes roughly 30–40 minutes per pound to reach medium-rare, before the sear. Shape matters more than weight: a long, thin roast cooks faster than a short, thick one. Use the times only for planning and cook to temperature.

Roast Size Approximate Time at 250°F (to about 115°F)
4 lb (2 ribs) About 2–2½ hours
8 lb (4 ribs) About 4–4½ hours
12 lb (6 ribs) About 5½–6½ hours

Build in at least an extra hour of cushion. A finished roast can rest, tented, for a while before the sear; a roast that is behind schedule cannot be rushed without overcooking the outside.

Common Prime Rib Mistakes

  • No thermometer. On a roast this expensive, a probe thermometer is essential.
  • Forgetting carryover. Pull it 5–10°F below your target.
  • Cooking it hot the whole time. High heat from the start gives you a thick gray band under the crust.
  • Slicing with the grain. Cut the bones off first, then slice across the grain.

Prime Rib Temperature FAQ

What temperature should prime rib be for medium-rare?

Pull it at about 120–125°F. It will finish around 130–135°F after resting or searing.

What temperature do you cook prime rib at?

For the most even doneness, cook prime rib low at 225–250°F, then sear it at about 500°F at the end.

How long does prime rib take at 250°F?

Roughly 30–40 minutes per pound to reach medium-rare before the sear. Cook to temperature, not time.

Is prime rib safe at medium-rare?

The USDA safe minimum for beef roasts is 145°F with a 3-minute rest. Many people enjoy prime rib at medium-rare; that is a personal choice, and if you are serving anyone who is pregnant, elderly, very young or immunocompromised, cook it to 145°F.

Should I cook prime rib bone-in or boneless?

Either works. Bone-in roasts are a little more forgiving and look great on the table; boneless roasts are easier to carve.

Cooking for a crowd this season? See our smoked turkey temperature guide and our tri-tip temperature guide.

Ready for the holiday roast? Season it with Daily Drip for a savory salt, pepper and garlic-forward crust. One shaker. Complete flavor.

Back to top
Home Shop
Wishlist
Log in